The Rhino PD-110 Pneumatic Post Driver combines easier handling than an equipment supported driver but has a slight advantage over the PD-55 in driving speed and heavy soil tolerance. Plus, the PD-110 provides better soil stabilization when driving the post at a deeper soil level is required. The PD-110 takes post driving capabilities to the next level. It is suited for driving 2″ to 4″ pipe and tube, structural concrete forms, pin piles, dock piles, and 4″ x 4″ wood.
- At 109 pounds, with a Alloy Steel piston, the PD-110 provides better handling in tough sites.
- Delivering up to 1700 blows per minute, and capable of driving a 2” post, ten to fifteen feet deep.
- No additional equipment required. Can be lifted by two people.
- Additional driving options possible with easy bolt-on adapters.
Applications with adapter:
1-1/4" to 1-1/2" Pipe
1-5/8" Round Post
2" Pipe
2-1/2" Pipe
3” Pipe
3-1/2" Pipe
4” Pipe
T-Posts
Telespar Post
Telespar Post Breakaway Anchor 2-1/2"
1.2 to 1.5 lbs/ft Channel Post
2 to 2.75 lbs/ft Channel Post
3 to 4 lbs/ft Channel Post
Channel Post Breakaway Anchor
C Post
4” x 4” Wood Post
4” x 6” H Column Guardrail Post